10.4.4 Using operation
Transformer scan sorting is always on. The sorting mode has default, X12, X30.
10.4.4.1 Sorting Mode Setup
After entering the Transformer Scan mode, press "Setup", and click "Handler mode" in the menu bar
on the right side of the display screen to enter the handler mode page. There are also pin definitions
corresponding to the corresponding handler modes on this page.
10.5 Instructions for HANDLER sorting of scanning fixtures
TH2840AX, TH2840BX, TH2840NX are compatible with TH1901, TH1831, TH1806 series scan
boxes.
The TH1831 scan box pin definition is exactly the same as the HANDLER definition of the TH2840
built-in scan board.
To Previous Page
