Tonghui TH2840 Series - Page 174

166
9.2.18.1 LOAD
 Description: Used to load saved files
Command systax:
:MMEM:LOAD?
:MMEM:LOAD <file>
Parameter:
file ---- specify the path of the file to be loaded, relatively complete file path or the index number of
the internal file fixed file, ranging from 1 to 50;
The corresponding relationship between the index number and the file is as follows:
Index number
1~50
LCR Mode
LCR.sda/LCR2.sda… in the root directory of
internal files
Transformer
single group mode
TRT.trt/TRT2.trt… in the root directory of
internal files
Transformer scan
mode
TH2840.t40/TH28402.t40… in the root
directory of internal files
Example:
:MMEM:LOAD 1 ----Load the file whose path is LCR.sta
:MMEM:LOAD 9 ----Load the file whose path is LCR9.sta
:MMEM:LOAD sss.sta ---- Load the file whose path is files/sss.sta
:MMEM:LOAD files/sss.sta ---- Load the file whose path is files/sss.sta
:MMEM:LOAD usb/sss.sta ----Load the file whose path is usb/sss.sta
:MMEM:LOAD? ---- Return to the pathname of the file to load
9.2.18.2 STORe
 Description: used to save the current instrument settings to a file
Command systax:
:MMEM:STOR <n>[,file]
Parameter:
n ---- for use with the default saved file naming
file ---- specify the name of the file to save
The corresponding relationship between the index number and the default file is as follows:
Index number
1~50
LCR Mode
LCR.sda/LCR2.sda… in the root directory of
internal files
Transformer
single group mode
TRT.trt/TRT2.trt… in the root directory of
internal files
Transformer scan
TH2840.t40/TH28402.t40…in the root directory