Tonghui TH2840 Series - Page 184

176
 Description: Set the LAN port gateway address
Command systax:
:SYST:LAN:GATeway?
:SYST:LAN:GATeway <192.168.22.1>
Parameter:
Example:
:SYST:LAN:GAT? ----Query LAN port gateway address
:SYST:LAN:GAT 192.168.22.1 ----
 Description: Set the LAN port gateway address
Command systax:
:SYST:LAN:GATeway?
:SYST:LAN:GATeway <192.168.22.1>
Parameter:
Example:
:SYST:LAN:GAT? ----Query LAN port gateway address
:SYST:LAN:GAT 192.168.22.1 ----
 Description: Set the subnet mask address of the LAN port
Command systax:
:SYST:LAN:SMASK?
:SYST:LAN:SMASK <255.255.255.0>
Parameter:
Example:
:SYST:LAN:SMASK? ----Query the subnet mask address of the LAN port
:SYST:LAN:SMASK 255.255.255.0 ----Set the subnet mask address of the LAN po
 Description: Set the DNS address of the LAN port
Command systax:
:SYST:LAN:DNS?
:SYST:LAN:DNS <255.23.12.0>,<255.23.14.1>
Parameter:
The DNS addresses at both ends represent the primary DNS address and the backup DNS address,
respectively.
Example:
:SYST:LAN:DNS? ----Query the DNS address of the LAN port
:SYST:LAN:DNS 255.23.12.0,255.23.14.1 ----
 Description: Query the MAC address of the LAN port
Command systax:
:SYST:LAN:MAC?
Parameter:
Example:
:SYST:LAN:MAC? ----Query the MAC address of the LAN port