Shutdown: After using the instrument, if you need to turn off the instrument, press and hold the
power button at the lower left corner of the front panel to turn off the instrument. After turning off
the instrument, the power button lights up in red, and the instrument is in the standby state. If you do
not use the instrument for a long time, please disconnect the power cord and store the instrument in
the environment required by 1.4.
Note: The factory password is set for this series of products. The factory password is 2840. The user
can reset the password according to his needs during the use. For details, please refer to the
password item on the <System Setup> page.
To Next Page
Loading...
