Station
Assignment
5-16 Strata CTX Programming - Part 2: CTX WinAdmin Programming 04/03
Key
Programs Used: 205, 213, and 215
Prerequisite Program:
200 on page 5-1 and 204 on page 5-8
The Feature Button assignments enable each button on the telephone to be addressed and coded to
represent a function or feature to be performed. Some feature buttons require additional parameters to
completely define the key (e.g., a Phantom DN needs a directory number, ringing assignment, and the tone
pitch when ringing occurs).
1. Use the “Feature Button Record Sheet” on page D-13 to plan your FB assignments.
2. From the Program Menu, click Station > Assignment.
3. Click on the Key tab (shown below).
Notes
• To Program DSS buttons, Program 214 should be completed.
• To program ADM buttons (ADM 1 or ADM 2 shown below), FB04 Add on Modules in Program 204
must be set to One or Two.
4. Enter one of the following in the Primary DN field:
• Primary DN to program DKT FBs.
• Primary DN plus an ADM number to Program ADM FBs.
• Primary DN plus DSS Key Assignment button to program DSS FBs
...or click one of the following buttons:
• List – view a summary list of programmed DKTs.
• Extended List – view a detailed list of programmed DKTs.
To Next Page
Loading...
