Telephone Button Programming
100 Series Programs
13-22 Strata CTX Programming - Part 3:Telephone Button Programming 04/03
PAD Table
PAD Device Number 1 2 3 4 5 6 7 8 9 101 102 131 132
PAD Device Number
Receiver (Listener)
Analog Telephone
DKT
Analog Trunk
T1 Trunk
ISDN Station
ISDN Trunk
CONF Bridge
Music Source
Ext. Paging
PAD Group 1
PAD Group 2
PAD Group 31
PAD Group 32
Sender (Speaker)
1Analog Telephone 000666X-0
2DKT 0006660-0
3Analog Trunk 006666X-6
4T1 Trunk 6660000-6
5ISDN Station 6660000-6
6ISDN Trunk 6660000-6
7 Conference Bridge (0) (0) (0) (0) (0) (0) (0) (0) (0)
8Music Source 000000000
9Ext. Paging 006666000
101 PAD Group 1
102 PAD Group 2
::
131 PAD Group 31
132 PAD Group 32
Note “X” data set for PAD Conference Table Assignment
Program 108
Button Sequence Value(s) Summary
108
PAD Group
Assignment
,
+ROG
This program permits the addition of up to 32 devices to the Pad Table
to deal with exceptions to the default table.
108-00 PAD Group Device
Type.
xyyyyy,
+ROG
xyyyy
y
Up to 6 digits
x = Device Type
yyyyy = Device number
Enter the Device Type(x) and Device number(y). Refer to the table
below.
108-01 PAD Group Number.
)%
, n1,
+ROG
,
+ROG
n1 = 0~6 (CTX100)
0~10 (CTX670 Basic)
0~32 (CTX670 Expanded)
Enter the PAD Group Number.
PAD Group Device Type Examples
Device Name
Device
Type
Device Number Example
DKT, SLT, ISDN, Station 1 0~99999 (PDN) if DKT device = 200, value = 1200.
ISDN Trunk 2 1~128 (Channel Group Number) if Channel Group # = 10, value = 210.
Analog Trunk, T1 Trunk 3 1~264 (Trunk Number) if Trunk # = 120, value = 3120.
Conference Bridge
4
none (Conference Bridge is only
one)
value = 4.
Music Source 5 1~15 (Music Port) if Music port = 8, value = 58.
External Paging Device 6 1~8 (Zone Relay Number) if External Paging Device = 3, value = 63.