Toshiba Strata CTX - Program Update

Telephone Button Programming
900 Series Programs
13-104 Strata CTX Programming - Part 3:Telephone Button Programming 04/03
➤ To view Backup progress
1. While the program is running (
)% and )% blink green), press )% to view the total number of
files to be transferred.
2. Press
)% to view the current file number that is being transferred.
3. The Backup is complete when
)% blinks intermittently.
4. To verify success, push
)%. Your telephone LCD should indicate *1.ALL_OK.
5. Press
+ROG to exit.
Note Do not press the +ROG button. Pressing the +ROG button restarts the Backup procedure.
To Restore data from the SmartMedia card to Strata CTX, see “System Initialize” on page 13-94.
Program Update
This program enables you to update the Strata CTX programs.
Program Number(s): 911
Prerequisite Program:
Format SmartMedia Card
Reference: None
Access Sequence: Login to programming mode from your telephone button pad:
+ROG✱✱✱✱✱.
At the PASSWORD= prompt, Enter your password and press+ROG.
At the PROG= prompt enter  and press +ROG.
FB Name FB Summary Value LCD Prompt
Update Function 01 Enter 1 or 2 to identify the type of Update
intended.
Select 3 to cancel a running update.
1:Update
2:Reboot
3:Cancel
1:Update
2:Reboot
3:Cancel
Total Blocks
02 View total blocks to be updated (total blocks
will vary depending on software versions).
0~65536 (CTX670)
0~128 (CTX100)
default = 0
n/a
Copied Blocks
03 View number of blocks copied. 0~65536 (CTX670)
0~128 (CTX100)
default = 0
n/a
Active Side Status
04 Backup Type Display 1:Normal
2:Trial
3:Fault
4:Don’t Care
5:Error
1:Normal
2:Trial
3:Fault
4:Don’t Care
5:Error
Stand by Side Status
05 Stand by Backup Type 1:Normal
2:Trial
3:Fault
4:Don’t Care
5:Error
1:Normal
2:Trial
3:Fault
4:Don’t Care
5:Error
Active Side Number 06 Active Side Number. 0 or 1
default = 0
ACT SIDE=
Status
07 View Backup Status. 1:Idle
2:Running
3:Success
4:Error
1:Idle
2:Running
3:Success
4:Error