Toshiba Strata CTX - Smdr for Ilg Assignment; Smdr for System Assignment

Services
Networking
Strata CTX Programming - Part 2: CTX WinAdmin Programming 04/03 9-45
Services
512 SMDR for System Assignment
Prerequisite Program: None
This table translates a Network COS received as part of a Traveling Class Mark to a local Class of Service
for access to local services. There is no translation of Outgoing Network COS.
513 SMDR for ILG Assignment
Prerequisite Program: None
This program assigns SMDR parameters for ILGs.
FIELD DESCRIPTION
01 Caller ID Field Include Caller ID records in SMDR.
Possible values: Enable (default) or Disable
02 B-Record for
Abandoned Call
Generate B Record for an abandoned call.
Possible values: Enable or Disable (default)
03 Automatic Number
Identification (ANI)
Include ANI in SMDR record.
Possible values: Enable (default) or Disable
04 Authorization Code Include authorization codes in SMDR records.
Possible values: Enable or Disable (default)
05 End-of-Record CR Include a Carriage Return (CR) at the end of an SMDR record.
Possible values: Enable (default) or Disable
FIELD DESCRIPTION
00 Incoming Line Group
(ILG)
Specify the ILG for which to set SMDR parameters.
Possible values: 1~32 (CTX100), 1~50 (CTX670 Basic),
1~128 (CTX670 Exp.), (default = no value)
01 Generate SMDR
Records
Enable to generate records for this ILG
Possible values: Enable (default) or Disable
02 DNIS Field Indication Check to include DNIS information in records for this ILG.
Possible values: Enable (default) or Disable
03 B Record for Incoming
Call
Enable B Record generation for incoming calls with or without incoming SMDR
being enabled.
Possible values: Enable or Disable (default)
04 Abandoned Call Record
Output
Enable record generation for abandoned calls. Incoming SMDR must be
turned on. Abandoned call records will be generated whether or not incoming
SMDR has been set.
Possible values: Enable or Disable (default)
05 Display Transferred Call
Records
Select whether to charge a transferred call to the source or destination party.
Possible values: Source (default) or Destination