Services
Least Cost Routing/Destination Restriction
9-24 Strata CTX Programming - Part 2: CTX WinAdmin Programming 04/03
506 Verified Account Codes
Prerequisite Program: 570 on page 9-23
This program adds or deletes entries in the DR Table associated with the DRL entered in Step 3 on page 9-
21.
571 Exception Numbers for Forced Account Codes
Prerequisite Program: 506 on page 9-24
Up to four telephone numbers can be programmed as exceptions to the forced and /or verified account code
entries (including 911). These special codes enable numbers to bypass the verification process and proceed
unhindered.
FIELD DESCRIPTION
Account Code Enter a valid accounting code that the user will be expected to dial. Digits 0~9
can be used.
Note The Account Code is set to the same digit length as the Verified Digit
Length in Program 570 above.
Possible values: Up to 15 ASCII characters (default = no value)
01 Verified Flag The Account Code Flag determines whether the number entered is to be used
as a verified account code or not. Some applications may allow users to dial an
accounting code which changes the restriction level for the call allowing it to be
placed.
Possible values: Set or No Set (default)
Note To delete a Verified Account Code set this field to No
Set.
02 DRL The DRL assigned to an accounting code allows users to override their
stations assigned DRL enabling a call to be placed.
Possible values: 0~16 (default = 0)
03 FRL The FRL assigned to an accounting code enables users to override the station
assigned FRL.
Possible values: 0~16 (default = 0)
04 Network COS Assign the Network COS to be used by this accounting code.
Possible values: 1~32 (default = 1)
FIELD DESCRIPTION
01 Exception Number 1 Enter a Forced Account Code Exception.
Possible values: Up to 4 digits
Exception 1 default = 911
Exception 2~4 default = no value
Note One of the assigned exception numbers should be 911. Exception
Numbers for Forced Account Code fields cannot be duplicated.
02 Exception Number 2
03 Exception Number 3
04 Exception Number 4