Toshiba Strata CTX - Telephone Button Commands

Telephone Button Programming
Telephone Button Overview
Strata CTX Programming - Part 3:Telephone Button Programming 04/03 13-3
Telephone Button
Programming
Telephone Button Commands
1. Use the following buttons to execute the commands:
•
+ROG – Enter.
•
3DJH/6FUROO – Scroll up or down.
•
6SNU – This delimiter moves cursors between sub-parameter values.
•
9RO▲ – Escape. 9RO▲ displays as  on the LCD. Press 9RO▲ to program  or

in dialing
sequences.
•
9RO▼ – Back space for line editing.
•
+ROG – Cancel.
•

– Use this button between values to specify a range of objects to be programmed (e.g., 1001*1005
enables programming of stations 1001 through 1005).
•

– Use this button between values to specify a set of objects to be programmed (e.g.,
1001**1005**1012 enables programming of stations 1001, 1005 and 1012).
• Off-hook – lift and replace the handset to immediately exit programming mode.
2. Keep the following in mind as you maneuver through Strata CTX programs.
• Default and/or current settings are displayed on the telephone LCD with an asterisk.
• Some Strata CTX Programs have more than 20 programmable parameters. To toggle from
parameters
)%~)% and )%~)% press the 6FUROO or 3DJH button after entering Program
Mode.
• To view parameter options on your telephone LCD, press the desired
)% button and press the 6FUROO
or
3DJH button.
• Each parameter shows a number to the left (e.g.,
2:DISABLE). Program the desired parameter by
pressing the number button (in this example
) that corresponds to your desired parameter.
• To enter data, use the number keys.
• To submit your program entry press
+ROG. To confirm a submitted entry, press +ROG again.
• To exit a program press
+ROG.
• To enter the
 character in your data string press the 9RO▲ and the  button simultaneously. An 
sign appears in your LCD. Press the
 button, then enter the remaining data.
• If you get an error code, press
+ROG (twice) to continue programming. See “System Error Codes” on
page B-1 for error code details.
Programming Parameters
Programs can have between one and 40 programmable parameters, each represented by the )%QQbuttons.
The LEDs light up for each
)%QQ button that features a programmable parameter. Each parameter is
programmed by entering values into the LCD from the telephone button pad.
1. At the SELECT PARAM prompt, press the appropriate
)%QQ button.
2. Enter the appropriate value from the telephone button pad using the Parameter Fields tables supplied
with each program.
3. Press
+ROG to submit.
4. Press another
)%QQ button to program more parameters
...or press
+ROG again to program.