Toshiba Strata CTX - Button Programming Procedure

Telephone Button Programming
Button Programming Procedure
Strata CTX Programming - Part 3:Telephone Button Programming 04/03 13-7
Telephone Button
Programming
5. Press )%. Press  to set ABR to attempt redials in 60 second increments and press +ROG.
6. Press
)%. Press  to set the ABR Recall Timer and press +ROG.
7. Press
)%. Press  to set the Hold Recall Timer and press +ROG.
8. Press
)%. Press  to set the First Interdigit Timer and press +ROG.
9. Press
)%. Press  to set the Second Interdigit Timer and press +ROG.
10.Press
)%. Press  to set the Ring Transfer No Answer Timer and press +ROG twice.
11.Press
+ROG to return to the PROG= prompt.
Now that you are more familiar with the Strata CTX button programming interface, begin programming
your Strata CTX system starting with Step 1 below.
Button Programming Procedure
Step 1: Enter Program Mode
Enter the button sequence displayed below to enter the CTX670 programming interface from a DKT
station.
1. Log in by pressing:
+ROG✱✱✱✱✱.
2. At the
PASSWORD= prompt, enter your password. Default is .
3. Press
+ROG.
Step 2: Enter Program Number
1. At the PROG= prompt enter the three digit program code (e.g., ) and press +ROG.
2. Programmable parameters are identified by the FB LEDs that are illuminated on the DKT. Go to
“Choose a Button Sequence” on page 13-7 Press on the related
)%QQ button to program a parameter.
...or if there are no illuminated FB LEDs, continue to Step 3.
Step 3: Enter FB00 Parameters
)% parameters designate a specific station, trunk, or circuit to be programmed. The )% prompt (e.g.,
EQUIP=, DN=, INDEX=, etc.) appears automatically in the LCD screen.
1. At the
)% prompt, enter the desired value using the telephone number pad.
2. Press
+ROG.
Step 4: Choose a Button Sequence
➤ Select the button sequences based on the programs required for programming the Strata CTX from the
Telephone. For 100~900 series programs, refer to pages 13-11~13-94.
Program Listings
This table is a list of programs found in this chapter.
Program
Number
Program Name
100 Card Slot Assignment
102 Flexible Access Codes