Services
Destination Restriction Wizard
9-58 Strata CTX Programming - Part 2: CTX WinAdmin Programming 04/03
Destination Restriction Wizard
This wizard guides you through the necessary steps (Programs) to configure Destination Restriction (DR).
You can skip steps in this wizard if they do not apply to a particular DR application.
➤ Select Service > Setup
Wizard > Destination
Restriction.
The wizard starts with a screen
that displays all the steps and
programs for setting up DR.
There are 10 steps to this
wizard.
➤ Click Start to go through
the wizard sequentially
...or you can select any step
to go to that step directly
(Example: clicking on Step
5 takes you to Program 103
Class of Service).
Notes
● To back out of one step and go to another step, click Destination Restriction on the left pane and then
click the Step.
● You don’t have to go through every step of the wizard.
● Tool tips provide necessary programming information.
Wizard Buttons
These buttons appear on some of the wizard screens. Clicking on any button lets you do the following:
• Start – starts the DR wizard.
• Add/Delete/Modify – enables you to add/delete/modify entry(s).
• Copy – enables you to copy all the information from one screen to another.
• Back/Next – enables you to navigate forward and backward through the screens.
• Table View – displays the appropriate table view. For example, clicking the DR Table View button
displays all the configured DRLs within the system.
• Print – enables you to print to a local printer.
• Refresh – enables you to get the most updated information.
To Next Page
Loading...
