IP Telephone Programming
151 BIPU Configuration
8-4 Strata CTX Programming - Part 2: CTX WinAdmin Programming 04/03
151 BIPU Configuration
This program is used to set up the IP address of the specific BIPU card to support the IP-Telephone. BIPU
card must be assigned before configuring the specific BIPU card.
1. From the Program Menu, click IP-
Telephone > BIPU Configuration.
The BIPU Configuration screen
displays (shown right)
2. Enter Program 151 data.
3. Click Submit.
FIELD DESCRIPTION
Cabinet & Slot Number Enter the cabinet and slot number of the BIPU to be configured.
Note: BIPUs must first be installed using PRG100 - System\Card
Assignment.
BIUPs can be installed in the slots listed:
Possible values: Slots 01-08 (CTX100 and CTX670 Basic), 01-06
(CTX670 Exp).
IP Address Enter the BIPU IP Address.
Subnet Address Enter the Subnet Address of the BIPU.
Default Gateway Address Enter the Default Gateway Address of the BIPU card.
Version Number of BIPU This is a read-only field.
6550
To Next Page
Loading...
