Toshiba Strata CTX - DR Override by System Speed Dial

Services
Least Cost Routing/Destination Restriction
Strata CTX Programming - Part 2: CTX WinAdmin Programming 04/03 9-25
Services
509 DR Override by System Speed Dial
Prerequisite Program: None
This command assigns the COS, DRL, FRL and QPL values used by DR Override by Speed Dial.
1. From the Program Menu, click
Services > LCR/DR > DR Override
by System Speed Dial.
2. Select the COS, DRL, FRL and
QPL override values.
3. Click Submit.
FIELD DESCRIPTION
01 Override COS Select the override COS value.
Possible values: 1~32 (default =1)
02 Override DRL Select the override DRL value.
Possible values: 1~16 (default =1)
03 Override FRL Select the override FRL value.
Possible values: 1~16 (default =1)
04 Override QPL Select the override QPL value.
Possible values: 1~16 (default =1)