Toshiba Strata CTX - Chapter 13 - Telephone Button Programming; Telephone Button Overview

Telephone Button Programming
Telephone Button Overview
13-2 Strata CTX Programming - Part 3:Telephone Button Programming 04/03
Telephone Button Overview
Strata CTX programmers can access programming mode from any DKT LCD telephone, except DKTs
connected to an RDSU. A 20-button telephone (shown below) is required to ensure full access to all
programming parameters. The telephone button programming interface enables limited programming
capabilities over ranges of stations or trunks.
Note Telephones connected to an RDSU cannot be used to program Strata CTX.
Figure 13-2 shows the telephone button pad for the DKT3020-series digital telephone or IPT1020-SD.
Figure 13-2 DKT3010/3020 and IPT1020-SD Button Telephones
6700
Msg Spdial
RedialMic
Spkr Cnf/Trn Hold
(FB10)
(FB08)
(FB09)
(FB07)
(FB06)
(FB05)
(FB04)
(FB03)
(FB02)
(FB01)
(FB20)
(FB19)
(FB18)
(FB17)
(FB16)
(FB15)
(FB14)
(FB13)
(FB12)
(FB11)
PageMode Scroll Feature
LCD
(24 Characters by 2 lines)
Vol
ZQ