Toshiba Strata CTX - Format;Unmount Smartmedia; System Admin Log

Telephone Button Programming
900 Series Programs
Strata CTX Programming - Part 3:Telephone Button Programming 04/03 13-101
Telephone Button
Programming
5. Enter another program number to continue programming or press +ROG again to exit programming
mode.
Note When the CTX 670 stops logging data, it automatically sends data to the SmartMedia card. Run the
Unmount command (Program 908) before removing the SmartMedia card to ensure complete data
transfer.
System Admin Log
Use this command to Start/Stop the System Admin Log.
Program Number(s): 907
Prerequisite Program:
None
Reference: Install SmartMedia card
Access Sequence: Login to programming mode from your telephone button pad:
+ROG✱✱✱✱✱.
At the PASSWORD= prompt, Enter your password and press+ROG.
At the PROG= prompt enter  and press +ROG.
1. Press )%. To run System Admin Log press  +ROG (twice). You are sent to the PROG= prompt.
2. To Stop the log, press
)% and press  on the dial pad.
3. Press
+ROG twice and wait for the 352*= prompt to appear before proceeding.
Note When the CTX 670 stops logging data, it automatically sends data to the SmartMedia card. Run the
Unmount command (Program 908) before removing the SmartMedia card to ensure complete data
transfer.
Format/Unmount SmartMedia
This program enables Administrators to format a SmartMedia card from Strata CTX WinAdmin or the
telephone button pad.
Note Strata CTX WinAdmin cannot view SmartMedia files directly. Additional hardware is required to
view the contents of the SmartMedia card.
Program Number(s): 908
Prerequisite Program:
None
Reference: None
Access Sequence: Login to programming mode from your telephone button pad:
+ROG✱✱✱✱✱.
At the PASSWORD= prompt, Enter your password and press+ROG.
At the PROG= prompt enter  and press +ROG
FB Name FB Summary Value LCD Prompt
Admin Log On/Off
01
Enter  or  to Start or Stop Admin Log.
1:Start
2:Stop
1:START
2:STOP