Toshiba Strata CTX - Data Initialize Programs

Telephone Button Programming
100 Series Programs
13-26 Strata CTX Programming - Part 3:Telephone Button Programming 04/03
Data Initialize Programs
Program
Number
Program Name Page #
500 System Call Forward Assignment 13-72
520 LCR Local Route Plan Assignment 13-80
521 LCR Route Plan Digit Analysis Assignment 13-81
522 LCR Exception Number Route Plans 13-81
523 LCR Route Plan Schedule Assignment 13-81
524 Route Table to Route Definition Assignment 13-82
525 LCR Route Definition Assignment 13-82
526 Modified Digits Table Assignment 13-82
527 LCR Holiday Table 13-82
529 LCR Route Plan Time Zone Assignment 13-83
530 DR LCR Screening Table Assignment 13-83
531 DR Screening Table for OLG 13-84
533 DR Level Table Assignment 13-84
534 DRL Exception Table Assignment 13-85
651 Private Routing Plan Analysis 13-89
653 Private Route Choice Table Assignment 13-89
654 Private Route Definition Table Assignment 13-90
655 Private Network Digit Modification Table Assignment 13-90
Program 117
Button Sequence Value(s) Summary
117
Public Dial Plan Digit
 , +ROG
This command is used to prevent users from circumventing
Destination Restriction by sending tones directly to the PSTN before
DR analysis is complete. It defines the number of digits expected in
PSTN numbers beginning with identified sequences. For example, a
number starting with the toll prefix “1” would be expected to be 11
digits long. Calls will be cut through to the public network only after
the expected number of digits have been received.
117-00 Prefix Number
n,
+ROG ,
n = Up to 7 digits
(Wild Cards n and x)
The initial, identifying external digits. 1 to 7 digits may include wild
cards “x” and “n” where x = 0~9 and n = 2~9.
117-01 Digits to Follow
)% , n1, +ROG , +ROG
n1 = 1~64 The total number of digits in a number beginning with the Prefix
Number above.