Services
Least Cost Routing/Destination Restriction
9-14 Strata CTX Programming - Part 2: CTX WinAdmin Programming 04/03
Public Holidays and LCR Time Zones
Programs Used: 527 and 529
1. Complete the “LCR Time Zone Record
Sheets” on page D-43.
2. From the Program Menu, click Services >
LCR/DR > Public Holidays and LCR
Time Zones.
3. Enter Program 527 data.
4. Enter Program 529 data.
5. Click Submit.
527 LCR Holiday Table
Prerequisite Program: None
This command assigns up to 128 holidays for LCR processing. These assignments are related to the Day
assignments established in Program 523.
529 LCR Route Plan Time Zone Assignment
Prerequisite Program: 520 on page 9-8
This command creates a three-dimensional array (Day, Time & LCR Group) for each Route Plan.
FIELD DESCRIPTION
00 Holiday Enter Date (YYYYMMDD). A maximum of 128 dates is allowed.
Possible values: YYYY = Year, MM = Month and DD = Day (default = no
value)
01 Add/Delete Choose to add or delete this date from the holiday table. Expired dates remain
in the table unless deleted.
Possible values: Add or Delete (default)
FIELD DESCRIPTION
00 Route Plan Select the LCR Route Plan Number to assign to this time zone.
Possible values: 1~64 (default = no value)
01 LCR Day Type Select a Day Type for which to define a time zone.
Possible values: Weekday, Weekend or Holiday (default = no value)
02 LCR Time Zone Select a Time Zone.
Possible values: Zone 1, Zone 2 or Zone 3 (default = no value)
03 Start Time Enter the start time for the selected Time Zone (hhmm).
Note Enter your Day Type and Time Zone selections before entering data
in to this field.
Possible values: hh = hour (0-23) and mm = minutes (0-59)
(default = 0000)
To Next Page
Loading...
