Toshiba Strata CTX - Community Name

Operation
Community Name
Strata CTX Programming - Part 2: CTX WinAdmin Programming 04/03 10-17
Operation
Community Name
Prerequisite Program: None
This program enables you to create and set up a Community Name (or passwords) to allow access to
specific Strata CTX systems.
1. From the Program Menu, click Operation >
Community Name.
2. Select the Index Number to assign to the
Community or click one of the following
buttons:
• Remove – highlight an existing community
from the table and click this button to
remove the selected community from the
index.
• Modify – highlight an existing community
from the table and click this button to
modify the IP Address, Privileges and
Administrator Level settings for this
community.
3. Enter the remaining fields.
4. Click Submit.
FIELD DESCRIPTION
Community Name Enter the Community name. The Community Name is a password that is stored in
the Strata CTX. To communicate with a Strata CTX, the CTX WinAdmin PC must
send a legal community name to the CTX when attempting to connect. The default
community name stored in the CTX is communityName (case sensitive). The Strata
CTX can store up to 10 community names.
IP Address Enter the IP Address of the Community Name. Each community name is associated
with an IP Address. This IP address is stored in the CTX with its associated
community name.
Possible values: a.b.c.d.; a = 0~255, b = 0~255, c = 0~255, d = 0~255
Notes
• To allow any CTX WinAdmin PC to connect to the Strata CTX with a particular
community name, enter  as the IP address for that Community Name.
• To allow only a specific CTX WinAdmin PC to connect to the CTX with a
particular community name, enter the static IP address of that PC for that
community name.
Privileges Select User Privilege Levels. These privileges are to assign the community name or
IP address to an internal Strata CTX level.
Possible values: Read (default) or Write
Note Read – The user cannot modify Strata CTX data regardless of the CTX
WinAdmin User level 1~4.
Write – The user can modify Strata CTX data according to the CTX
WinAdmin user level 1~4.