Station
209 Hunt Group
Strata CTX Programming - Part 2: CTX WinAdmin Programming 04/03 5-27
Station
218 Station Hunt Assignments
Prerequisite Program: 209 on page 5-26
This program assigns station DNs to Hunt Groups using Program 209, and assigns the rotation order in
which DNs are hunted.
1. Complete the “Hunt Group Record
Sheet” on page D-17.
2. From the Program Menu, click
Station > Hunt Group Assignment.
The Station Hunt Group Assignment
screen displays.
3. Click on the Member tab (shown
right).
4. Enter a Member Number for an
existing record
...or click one of the following
buttons:
• List – view a summary list of
programmed Hunt Groups.
• Add – Assign a new station DN to the Hunt Group number entered above.
• Append – Assign a new DN as the last DN in a Hunt Group’s hunt order.
• Modify – Highlight an existing DN in the Hunt Order and change the station DN assignment.
• Delete – Delete station DN assignment to Hunt Order number.
5. Click Submit.
06 Muitple DN Hunt Enable if hunt group is created for multiple DN operation. Multiple DN hunt groups should be
circular with no pilot number.
Possible values: Enable or Disable (default)
07 DHG Auto Camp-on Whether to execute Automatic Camp On to the Distributed Hunt Group or not.
Possible values: Enable or Disable (default)
Should be applied to VM Distributed Hunt Groups so callers automatically camp on to Voice
Mail when all VM ports are busy. Does not apply to Circular or Serial hunt groups.
FIELD DESCRIPTION
Hunt Group Number Enter an existing Hunt Group number or use the List, Add, Append, Modify, or Delete buttons
as described above.
Possible values: 1~640 (default = no value)
01 Hunt Order This field assigns a station DNs position within a Hunt Group’s Hunt Order. The Hunt Order is
selected automatically by CTX WinAdmin. Programmers should assign the last station in the
Hunt Order first and assign the first station in the Hunt Order last.
Possible values: 1~560 (default = no value)
FIELD DESCRIPTION
To Next Page
Loading...
