Station
209 Hunt Group
5-26 Strata CTX Programming - Part 2: CTX WinAdmin Programming 04/03
209 Hunt Group
Prerequisite Program: 200 on page 5-1
This command assigns Station Hunting Group data.
1. Complete the “Hunt Group Record
Sheet” on page D-17.
2. From the Program Menu, click
Station > Hunt Group. The Station
Hunt Group displays.
3. Click on the Group tab (shown
right).
4. Enter a Group Number for an
existing record
...or click one of the following
buttons:
• List – view a summary list of programmed Hunt Groups.
• Create – Assign a new Hunt Group with custom settings.
5. Click Submit.
FIELD DESCRIPTION
Group Number Hunt Group Number
Possible values: 1~90 (CTX100), 1~200 (CTX670 Basic),1~640 (CTX670 Exp.)
(default = no value)
01 Hunt Method Select Hunt Method
Possible values: Distributed (for Voice Mail hunt groups) or Circular (for Multiple DN hunt
groups) (default)
02 Pilot Number Enter Pilot Directory Number. This is the number that is dialed to call the hunt group.
Possible values: Up to 5 ASCII characters (default = no value) any type of hunt group can
have a pilot number.
Note Any type of hunt group can have a pilot number. Distributed hunt groups must have
a pilot number. Voice Mail hunt groups should be Distributed with a Pilot Number.
Multiple DN Hunt groups should be Circular with no Pilot Number.
04 Number to Display Enter the number that is displayed when called by, or when calling any member of the hunt
group.
Possible values: Up to 5 ASCII characters (default = no value)
Note This number should be the DH Group Pilot number for Voice Mail hunt groups. This
number could be the PDN of a Multiple DN Hunt group, in which case the number
would override the number assigned in Program 200, FB15 for PDNs and Program
206, FB04 for Phantom DNs.
05 Pilot No. SCFwd Allows you to assign a System Call Forward pattern to the Pilot Number of a Hunt Group.
Possible values: 0~4 (CTX100), 0~10 (CTX670 Basic),0~32 (CTX670 Exp.)
(default = 0)
To Next Page
Loading...
