Services
DRL Table View
Strata CTX Programming - Part 2: CTX WinAdmin Programming 04/03 9-57
Services
518 Multiple Calling Members Assignment
Prerequisite Program: 517
Use this program to assign members to a group.
1. From the Program Menu, click
Services > Multiple Calling Group.
2. Click the Member tab.
3. Select the Index Number, then enter
the Member DN.
Important! Immediate Destinations
can only be PDNs
(Digital and/or Standard
Telephones) and PhDNs.
Delay Destinations can
be PDNs of Standard
telephone circuits only
and Voice Mail Hunt
Group Pilot Numbers
(not Multiple DN Hunt
Groups).
Note Each group can have up to 25 members. You can have up to 64 groups.
4. Submit is greyed out because the members are automatically submitted as they get added.
Note The buttons on this screen are dynamic. When you select an empty Index number, the Add button
displays. When you select and existing Index number, the Modify and Remove buttons display.
Modify enables you to edit, while Remove deletes the multiple ringing group index number.
DRL Table View
The DR table view can be accessed by selecting Services > DRL Table View. This table is a read only table
and enables you to view all the programmed DRLs.
OLG Screening Table View
The OLG Screening table view can be accessed by selecting Services > OLG Screening Table View. This
table is a read only table and enables you to view the programmed OLGs.
Number Type Description
Multiple Calling Group Index Enter a group number.
Possible values: 1~16 (CTX100), 1~32 (CTX670 Basic) and 1~64 (CTX670
Exp.)
01 Member DN Enter the DN of the extension you wish to add.
Possible values: Up to 32 digits
05 Ringing Options Select either: Immediate, Delay 1 or Delay 2.
To Next Page
Loading...
