IP Telephone Programming
IPT Program Update
8-10 Strata CTX Programming - Part 2: CTX WinAdmin Programming 04/03
IPT Program Update
The IPT program update function consists of retrieving the updated file from an FTP server, updating and
rebooting the selected IPT.
Prerequisites
1. Make sure that the networking devices between BIPU and the FTP server meet the requirements for IP-
CTX (min 100Mb/s switching hub(s)).
2. Create an account on the machine designated to be the FTP server.
3. Create a FTP virtual directory on the FTP server machine and specify the physical location of the
updated file on the FTP server machine.
4. The FTP server machine IP address should be configured such that is visible by the BIPU IP address.
5. Disable the BIPU to which the IPT is connected, by using the appropriate Cabinet function from
Component menu.
Programming
1. From the Program Menu,
click IP-Telephone > IPT
Program Update. The IPT
Program Update screen
displays (shown right)
2. Enter the FTP information.
3. Click Start to begin the IPT
Program update.
FIELD DESCRIPTION
User Name Enter the user name of the account created on the FTP server.
Password Enter the password for the account created on the FTP server.
IP Address Enter the IP address of the FTP server machine.
Data Directory Enter the name of the FTP virtual directory on the FTP server.
File Name Enter the name of the updated file (“apph248.out”).
To Next Page
Loading...
