System
PAD Table
Strata CTX Programming - Part 2: CTX WinAdmin Programming 04/03 4-21
System
PAD Table
Programs Used: 107, 108 and 114
Assign PAD groups, PAD Tables and PAD Conference Tables using these programs.
1. From the Program Menu click System >
PAD Table. The PAD Table Assignment
screen displays (shown right).
2. Enter Program 107 data.
3. Enter Program 108 data.
4. Enter Program 114 data.
5. Click Submit.
Note Clicking *Note displays Table 4-9 for
Program 107 and Table 4-10 for Program
108.
107 PAD Table Assignment
Prerequisite Program: None
Assigns additional Sender and Receiver PAD values to PAD groups in the PAD table.
FIELD DESCRIPTION
01 Sender PAD Device
Number
Enter Sender PAD Device Number from PAD Table.
Possible values: Up to 3 digits. 101~132 (CTX670 Expanded),
101~110 (CTX670)
101~106 (CTX100),(default = no value), see Table 4-9 below.
02 Receiver PAD Device
Number
Enter Receiver PAD Device Number from PAD Table.
Possible values: Up to 3 digits. 101~132 (CTX670 Expanded),
101~110 (CTX670)
101~106 (CTX100)
(default = no value), see Table 4-9 below.
03 PAD Loss Enter PAD Value (See Table 4-9 below, or click on the drop down menu). The
value shown shows the net effect.
Note To pad is to insert loss; therefore, “negative loss” equals net gain.
Possible values: 1 = 6 dB Net Gain, 2 = 3dB Net Gain, 3 = 0dB, 4 = 3dB Net
Loss, 5 = 6dB Net Loss, 6 = 9dB Net Loss, 7 = 12dB Net Loss
or 8 = 15dB Net Loss (default = no value).
To Next Page
Loading...
