Services
Networking
Strata CTX Programming - Part 2: CTX WinAdmin Programming 04/03 9-39
Services
656 Node ID Assignment
Prerequisite Program: 102 on page 4-3
This program assigns up to four Network Node IDs to process incoming network calls. Each Node ID has
an overlap code. Strata CTX will substitute the Overlap Code for the Node ID before processing the call
further. A Network Directory Number consists of a Node ID and the desired node.
1. From the Program Menu, click
Services > Networking > Node ID.
2. Enter Program 656 data.
3. Click Submit.
FIELD DESCRIPTION
01 Primary Node ID Enter the Primary Node ID for this node. This Node ID identifies the node
used for administering Strata Net.
Possible values: Up to 6 ASCII characters (default = no value)
Primary Overlap Code Enter the Overlap Code associated with the Primary Node ID. An Overlap
Code is the string of digits that replaces the Node ID to continue call
processing.
Possible values: Up to 4 ASCII characters (default = no value)
02 Node ID 2 Enter Node ID 2 for this node.
Possible values: Up to 6 ASCII characters (default = no value)
Overlap Code 2 Enter Overlap Code for Node ID 2.
Possible values: Up to 4 ASCII characters (default = no value)
03 Node ID 3 Enter Node ID 3 for this node.
Possible values: Up to 6 ASCII characters (default = no value)
Overlap Code 3 Enter Overlap Code for Node ID 3.
Possible values: Up to 4 ASCII characters (default = no value)
04 Node ID 4 Enter Node ID 4 for this node.
Possible values: Up to 6 ASCII characters (default = no value)
Overlap Code 4 Enter Overlap Code for Node ID 4.
Possible values: Up to 4 ASCII characters (default = no value)
To Next Page
Loading...
