Toshiba Strata CTX - Dr Lcr Screening Table Assignment; LCR;DR Screening

Services
Least Cost Routing/Destination Restriction
Strata CTX Programming - Part 2: CTX WinAdmin Programming 04/03 9-19
Services
LCR/DR Screening
Programs Used: 530 and 531
These programs enable and set up screening for DR and LCR.
1. Complete the “DR LCR Screening
Record Sheet” on page D-44.
2. From the Program Menu, click
Services > LCR/DR > LCR/DR
Screening.
3. Enter Program 530 and 531 data
...or click one of the following
buttons:
• List – view a summary list of
programmed Screened Dial
Strings or Behind Centrex
Access Codes.
• Copy – Enter a Screened Dial
String or Behind Centrex
Access Code in the field with
the corresponding name. Click Copy to make a new assignment.
4. Click Submit.
530 DR LCR Screening Table Assignment
Prerequisite Program: None
This command screens dialed digits for access codes such as Carrier Identification Codes or Behind
Centrex/PBX access codes. Used only in LCR calls.
FIELD DESCRIPTION
00 Screening Dial String Enter the string of external digits to be screened.
Possible values: Up to 7 ASCII characters (default = no value)
01 Add String to Table Add the Screening Dial String to the DR LCR Screening Table.
Possible values: Add or Delete (default)
02 Destination Restriction
Action
Select DR Action.
Possible values: Bypass (default) or Skip and Apply
• Bypass – Do not apply DR.
• Skip and Apply – Apply DR to the dialed digits excluding the number of
digits specified in Skip Length.
03 Least Cost Routing
Action
Select LCR Action.
Possible values:
• Apply – (default) Apply LCR to all of the external dialed digits.
• Skip and Apply – Apply LCR to the dialed digits excluding the number of
digits specified in Skip Length.