Maintenance
Error Alarm Log
Strata CTX Programming - Part 2: CTX WinAdmin Programming 04/03 11-5
Maintenance
Error Alarm Log
Prerequisite Program: None
This program enables you to trace errors and alarms in Strata CTX.
1. Install the SmartMedia Card into
the designated slot of the Strata
CTX processor.
2. From the Program Menu, click
Operation > Maintenance > Error/
Alarm Logs.
3. Click Submit.
FIELD DESCRIPTION
Start Date Enter the date (YYMMDD) and time (hhmmss) on which to start the log.
Possible values: YY = Year, MM = Month and DD = day (default = no value)
hh = Hour, mm = Minutes and ss = seconds (default = no value)
End Date Enter the date and time on which to end the log.
Possible values: YY = Year, MM = Month and DD = day (default = no value)
hh = Hour, mm = Minutes and ss = seconds (default = no value)
Start Rank Code Prioritize by selecting a Rank Code.
Possible values: 1~99 (default = no value)
End Rank Code Organize by selecting an End Rank Code.
Possible values: 1~99 (default = no value)
Error Code This field logs the number of error codes.
Possible values: 0~9999999999 (default = 0)
Org. Code This field reflects the Error origination code.
Possible values: 1~10 (default = no value)
Search Number Displays the search sequence.
Possible values: 1~1000 (default = 0)
Search Result Number This field displays the Search result number.
Possible values: 1 or 2 (default = no value)
Normal Log This field displays the log information.
Expand Log This field displays details of the logged data.
Search Result Search results are displayed in this field.
To Next Page
Loading...
