Services
Networking
Strata CTX Programming - Part 2: CTX WinAdmin Programming 04/03 9-47
Services
650 Behind Centrex Assignment
Prerequisite Program: None
This feature allows Strata CTX to connect to the station side of a PBX or Centrex using a physical loop
trunk interface. DR and Least Cost Routing may need to account for access codes required by the PBX or
Centrex before connecting to the public network.
1. Complete the “Behind Centrex
Assignment Record Sheet” on page D-52
below.
2. From the Program Menu, click Services >
Miscellaneous > Behind Centrex
Assignment.
3. Click Submit.
Table 9-1 Circuit Type Code Definitions
Circuit Name Circuit Type Circuit Number Example
DN 1 0~99999 (DN) if DN is 200, value is 1200
CO 2 1~264 (Trunk Number) if CO is 30, value is 230
GCO 3 1~128 (GCO Key Group Number) if GCO is 50, value is 350
POOL 4 1~128 (POOL Key Group Number) if POOL is 80, value data is 480
FIELD DESCRIPTION
00 OLG Number Select OLG that is attached to a Centrex (or other PBX).
Possible values: 1~32 (CTX100), 1~50 (CTX670 Basic),
1~128 (CTX670 Exp.), (default = no value)
01 Behind Centrex Enable Behind Centrex Operation for this OLG.
Possible values: Enable or Disable (default)
02 Assume 9 Enable the Assume 9 feature.
Possible values: Enable or Disable (default)
To Next Page
Loading...
