Strata CTX Programming - Part 3:Telephone Button Programming 04/03 13-1
Telephone Button
Programming
Telephone Button Programming 13
This chapter discusses the button programming interface provided with Strata CTX. This chapter also
includes Button Programming examples, procedures, and tables to program 100~800 series programs. This
chapter has tables that list programs sequentially by program number. Tables found below a program table
contain required information for the above program.
Important! If you do not program button sequences correctly, the DKT LCD will display an error code.
Refer to Appendix B – System Error Codes.
Record Sheet Overview
Fill out the Appendix D – Record Sheets (see Figure 13-1 as an example), then enter this data using a 20-
button LCD digital (DKT) telephone.
6378
66 BETA
Station
Assignment
DKT Parameters Record Sheet
PDN: _____________________
Station Type Ext. Ring Repeat Continuous DTMF Ring Over Busy Cycles
Key Strip Pattern Not Used Display Language Attd. Overflow Dest.
Key Strip Type Ringing Line Preference Adapter Trunk Test and Verify
Add-on Modules Off-hook Preference Blind Transfer Auto Line Hold
Tone/Voice First Ringing Preference. Mail Box Selection
OCA Type Text Message Display MIC Init. Value
Handsfree MIC Call History Memory Microphone
Handsfree Tone DTMF Back Tone Speaker Mode Tones
PDN: _____________________
Station Type Ext. Ring Repeat Continuous DTMF Ring Over Busy Cycles
Key Strip Pattern Not Used Display Language Attd. Overflow Dest.
Key Strip Type Ringing Line Preference Adapter Trunk Test and Verify
Add-on Modules Off-hook Preference Bli nd Transfer Auto Line Hold
Tone/Voice First Ringing Preference. Mail Box Selection
OCA Type Text Message Display MIC Init. Value
Handsfree MIC Call History Memory Microphone
Handsfree Tone DTMF Back Tone Speaker Mode Tones
PDN: _____________________
Station Type Ext. R ing Repeat Continuous DTMF Ring Over Busy Cycles
Key Strip Pattern Not Used Display Language Attd. Overflow Dest.
Key Strip Type Ringing Line Preference Adapter Trunk Test and Verify
Add-on Modules Off-hook Preference Bli nd Transfer Auto Line Hold
Tone/Voice First Ringing Preference. Mail Box Selection
OCA Type Text Message Display MIC Init. Value
Handsfree MIC Call History Memory Microphone
Handsfree Tone DTMF Back Tone Speaker Mode Tones
PDN: _____________________
Station Type Ext. R ing Repeat Continuous DTMF Ring Over Busy Cycles
Key Strip Pattern Not Used Display Language Attd. Overflow Dest.
Record Sheet
Provides a list of
available features. The
sheet is used to record
the assignment of
features or the operation
of each program. Each
sheet provides space to
record data. This data
will be referred to when
programming the
system.
Figure 13-1
System Record Sheet Sample
To Next Page
Loading...
