Toshiba Strata CTX - Public Dial Plan Digit Analysis

System
117 Public Dial Plan Digit Analysis
Strata CTX Programming - Part 2: CTX WinAdmin Programming 04/03 4-7
System
117 Public Dial Plan Digit Analysis
Prerequisite Program: None
This program is used to prevent users from circumventing Destination Restriction (DR) by sending tones
directly to the PSTN before DR analysis is complete. It defines the number of digits expected in PSTN
numbers beginning with identified sequences.
For example, a number starting with the toll prefix “1” would be expected to be 11 digits long. Calls will
be cut through to the public network only after the expected number of digits have been received.
1. From the Program Menu click
System > Public Numbering Plan.
The Public numbering Plan
Analyzed Digit Number
Assignment screen displays (shown
at right).
2. Enter the Prefix Number used for
external calls.
3. Select Digits to Follow.
4. Click Submit.
FIELD DESCRIPTION
00 Prefix Number Enter the initial, identifying external digits. 1 to 7 digits may include wild cards “X”
and “N”.
Possible values: 1~7 (N = 2~9 and X = 0~9) (default = no value)
01 Digits to Follow Select the number of digits to follow the prefix number established above. It is
the total number of digits in a number beginning with the Prefix Number above.
Possible values: 0~64 (default = 0)