Services
Networking
Strata CTX Programming - Part 2: CTX WinAdmin Programming 04/03 9-41
Services
651 Private Routing Plan Analysis
Prerequisite Program: 656 on page 9-39 and 306 on page 6-4
Assigns the Node IDs to Route Choice Tables for Private Networking.
1. Complete the “Private Routing Plan
Analysis Table Record Sheet” on
page D-48.
2. From the Program Menu, click
Services > Networking > Route
Plan Analysis.
3. Enter the Node ID number (six digit
numeral) to add to the Private
Routing Plan Analysis Table.
Click List to see a summary list of
programmed Node IDs or click
Copy to copy data from an existing
Node ID.
4. Select the Private Route Choice
Table in which to add the Node ID entered in Step 3 above. Possible values are 1~64, 0 = Delete and
default = 0.
5. Click Submit.
Private Route Choice Definition
Programs Used: 653, 654 and 655
Use these command to define Private Network Routing parameters.
1. Complete the “Route Choice
Definition Record Sheet” on
page D-49.
2. From the Program Menu, click
Services > Networking > Route
Choice Definition.
3. Enter Program 653, 654 and 655
data.
4. Select the Private Network.
5. Click Submit.
To Next Page
Loading...
