Toshiba Strata CTX - All ISDN Trunk Trace; Event Trace Side Change

Telephone Button Programming
900 Series Programs
13-100 Strata CTX Programming - Part 3:Telephone Button Programming 04/03
All ISDN Trunk Trace
Program start/stop of packaged detailed collection of event trace functions. This program is only available
in the telephone button programming mode.
Program Number(s): 905
Prerequisite Program:
“Format/Unmount SmartMedia” on page 13-101, “ISDN Trace Location” on page 13-99,
“ISDN Trace Location” on page 13-99 and “Event Trace Control” on page 13-97
Reference: Install SmartMedia card
Access Sequence: Login to programming mode from your telephone button pad:
+ROG✱✱✱✱✱.
At the PASSWORD= prompt, Enter your password and press+ROG.
At the PROG= prompt enter  and press +ROG.
1. Press )%.
2. Select
, or  to turn on or off.
3. Press
+ROG twice to execute.
4. Press
+ROG to return to the PROG= prompt.
5. Enter another program number to continue programming or press
+ROG again to exit programming
mode.
Event Trace Side Change
This program enables you to manage your ISDN protocol trace. This program is only available in the
telephone button programming mode.
Program Number(s): 906
Prerequisite Program:
“Format/Unmount SmartMedia” on page 13-101
Reference: Install SmartMedia card
Access Sequence: Login to programming mode from your telephone button pad:
+ROG✱✱✱✱✱.
At the PASSWORD= prompt, Enter your password and press+ROG.
At the PROG= prompt enter  and press +ROG.
1. Press )%.
2. Select
, , or  to select parameter.
3. Press
+ROG to execute.
4. Press
+ROG to return to the PROG= prompt.
FB Name FB Summary Value LCD Prompt
Trace All ISDN
Trunks
01
Output All ISDN Trunk Events to
SmartMedia.
1:On (default)
2:Off
1:ON
2:OFF
FB Name FB Summary Value LCD Prompt
Side Change 01
Enter desired parameter number.
1:Message
2:ISDN
3:Message+ISDN
1:MESSAGE
2:ISDN
3:MESSAGE+ISDN