Operation
License Information
Strata CTX Programming - Part 2: CTX WinAdmin Programming 04/03 10-21
Operation
License Activate
Prerequisite Program: 913 above
This program enables activation of CTX WinAdmin licenses issued in Program 913.
License Information
The following programs enable you to set up Licensing details for CTX WinAdmin users.
Prerequisite Program: None
1. From the Program Menu, click
Operation > License Information.
2. View Licensing details for this
Strata CTX account.
This view is read-only
information.
FIELD DESCRIPTION
Delay Timer Select Activation Delay Timer in hours.
Possible values: 0~24 (default = 0)
Notes
• Enter 0 to issue or activate the license immediately or 1~24 to set the automatic
delay activation feature, where 1 = 1 hour delay; 2 = 2 hour delay, etc.
• After the license is activated, use the License Information screen below to check
that all Ports and features have been activated properly.
FIELD DESCRIPTION
CTX Release Number This is the Basic Release Number of CTX software. To view the Active Software
Version, go to Operations/System Setup.
Number of Serial
Ports
This identifies the number of serial ports licensed on the BSIS.
One license is needed for each SMDR and SMDI device connected to BSIS.
(Programs 803 and 804 assigns BSIS ports).
StrataNet QSIG
Networking
This license must be enabled on each CTX in a QSIG Network.
System Type This identifies the type of CTX system to which CTX WinAdmin is currently
connected.