Toshiba Strata CTX - Lcr Exception Number Route Plans; Lcr Route Plan Digit Analysis Assignment

Services
Least Cost Routing/Destination Restriction
Strata CTX Programming - Part 2: CTX WinAdmin Programming 04/03 9-9
Services
521 LCR Route Plan Digit Analysis Assignment
Prerequisite Program: 520 on page 9-8
This program builds the basic LCR Analysis Table.
522 LCR Exception Number Route Plans
Prerequisite Program: 521 on page 9-9
This command assigns up to 1280 dialed external digit strings to the Route Plan Exception Analysis Table
which assigns each string to 1 of 64 Route Choice Tables. The values expressed here are exceptions to the
values established in Program 521.
FIELD DESCRIPTION
00 Analysis Digits Enter the external digit strings (area codes, toll prefixes, service codes, etc.) to
be assigned to a Route Plan Analysis Table.
Strings may be up to 32 digits long. There Route Plan Analysis Table may have
1280 members. A digit string can only be in one table at a time.
Possible values: Digits may include wild cards “X” and “N” where X = 0~9 and
N = 2~9 (default = no value).
01 Route Plan Number Enter the Route Plan number to which to assign the Analysis Digits.
Note Entering 0 deletes the Analysis Digits from the table to which they
had been assigned.
Possible values: 0~64 (default = 0)
FIELD DESCRIPTION
00 Exception Digits Enter the external digit strings (area codes, toll prefixes, service codes, etc.) to
be assigned to a Route Plan Exception Analysis Table.
Strings may be up to 32 digits long. The Exception Route Plan Analysis Table
may have 1280 members. A digit string can only be in one table at a time.
Possible values: Digits may include wild cards “X” and “N” where X = 0~9 and
N = 2~9 (default = no value).
01 Exception Table Enter the Route Plan Table in which to assign the Exception Digits.
Note Entering 0 deletes the Exception Digits from the table.
Possible values: 1~64 (default = 0)