System
Day Night Service
4-20 Strata CTX Programming - Part 2: CTX WinAdmin Programming 04/03
106 Day/Night Mode “Type of Day” Mapping Table Assignment
Prerequisite Program: 113 on page 4-20
The Day of the Week schedule defines each day as the type of day the schedule shall follow. These types of
days are called Work Day, Non-work Day, and Holiday. Each day of the week can be classified.
113 Day/Night Mode Daily Schedule Assignment
Prerequisite Program: None
The Day/Night Mode daily schedule defines the times for the start of the Work Day, Non-work Day, and
Holiday for each of the modes (Day, Day2. Night). Each “type of day” defined in “106 Day/Night Mode
“Type of Day” Mapping Table Assignment” on page 4-20 requires an assigned schedule. Complete “Day/
Night Mode Record Sheet” on page D-8.
Note The start time for Day 1 mode equals the end time for Night mode.
FIELD DESCRIPTION
01 Monday Assign the type of day schedule that is to be used for each day of the week.
Possible values: Work Day (default), Non-work Day or Holiday
02 Tuesday
03 Wednesday
04 Thursday
05 Friday
06 Saturday Assign the type of day schedule that is to be used for each day of the weekend.
Possible values: Work Day, Non-work Day (default) or Holiday
07 Sunday
FIELD DESCRIPTION
Work Day Enter the Day1, Day2 and Night Mode start time for Work Day day type.
Possible values: hhmm; hh = hour (00~23, 99), mm = minutes (00~59, 99)
(default = 9999)
Note 9999 deletes or skip modes.
• 01 Day 1 Mode
• 02 Day2 Mode
• 03 Night Mode
Non-Work Day Enter the Day1, Day2 and Night Mode start times for Non-Work Day day type.
Possible values: hhmm; hh = hour (00~23, 99), mm = minutes (00~59, 99)
(default = 9999)
Note Enter 9999 deletes or skip modes.
• 04 Day 1 Mode
• 05 Day2 Mode
• 06 Night Mode
Holiday Enter the Day1, Day2 and Night Mode start times for Holiday Day day type.
Possible values: hhmm; hh = hour (00~23, 99), mm = minutes (00~59, 99)
(default = 9999)
Note 9999 deletes or skip modes.
• 07 Day 1 Mode
• 08 Day2 Mode
• 09 Night Mode
To Next Page
Loading...
