Toshiba Strata CTX - Remote Node Data Assignment

Services
Networking
9-40 Strata CTX Programming - Part 2: CTX WinAdmin Programming 04/03
670 Remote Node Data Assignment
This command assigns the Remote node data (requires R1.3 and higher).
1. From the Program Menu,
click Services >
Networking > Remote
Node Data.
2. Enter Program 670 data.
3. Click Submit.
FIELD DESCRIPTION
Remote Node ID Enter the Remote Node ID for this node.
Possible values: Up to 6 digits (default = no value)
Remote Node IP Address Enter the remote node IP address.
Possible values: Up to 15 digits (default = no value)
Remote Node Port Number Enter remote node port number.
Possible values: 0~65535 (default = no value)