System
501 System Speed Dial
4-18 Strata CTX Programming - Part 2: CTX WinAdmin Programming 04/03
501 System Speed Dial
Prerequisite Program: None
System Speed Dial consists of up to 800 pre-programmed numbers each containing up to 32 digits. If the
number being entered exceeds the 32 digits, the next speed dial location will automatically be appended to
create longer numbers. One other speed dial location can be nested within the number for dialing a
common routine with the number (see “516 Station Speed Dial” on page 5-29 for more information about
nesting).
1. Complete the “System Speed Dial
Record Sheet” on page D-7.
2. From the Program Menu, click System >
System Speed Dial. The System Speed
Dial screen displays (shown right).
3. Enter Program 501 data.
4. Click Submit.
FIELD DESCRIPTION
00 Speed Dial Bin Enter the speed dial bin location.
Possible values: 000~799 (default = no value)
01 Number This is the dialable number stored in the speed dial bin.
Possible values: Up to 32 digits, 0~9, *, # and Pauses (default = no value)
To enter pauses enter Px, where x equals 1~9 (seconds), which is the length of
the pause.
02 Name This is the Name that appears on Telephone LCD dial directories.
Possible values: Up to 8 ASCII characters (default = no value)
To Next Page
Loading...
