Services
550 Enhanced 911 Emergency Call Group
9-54 Strata CTX Programming - Part 2: CTX WinAdmin Programming 04/03
550 Enhanced 911 Emergency Call Group
Prerequisite Program: Program 105
This command assigns OLGs to the Enhanced
911 Emergency Call Group.
1. Complete the “Emergency Call Group
Assignment Record Sheet” on page D-55.
2. From the Program Menu, click Services >
Enhanced 911.
3. Select Program 550 data.
4. Click Submit.
Multiple Call Group
To set up Multiple Call/Delayed Ringing you must have a Multiple Call (MC) Group set in Program 517.
You can register up to 25 calling members for every MC Group in Program 518. You can set each member
to be Immediate, Delayed Ring 1, or Delayed Ring 2. The Delayed Ring times are independently
adjustable (1~180 seconds) for each Multiple Call Group Member.
Important! Immediate Destinations can only be PDNs (Digital and/or Standard Telephones) and
PhDNs.
Delay Destinations can be PDNs of Standard telephone circuits only and Voice Mail Hunt
Group Pilot Numbers (not Multiple DN Hunt Groups).
Incoming Call to MC Group
The following can occur when calling members are set as Immediate, Delayed Ring 1, or Delayed Ring 2.
• If the members of a Multiple Call Group are assigned Immediate ring, the call is received at all
destinations immediately. In this case, each destination LCD displays the same incoming call
information.
• If the MC Group destination (member) is assigned to Delayed Ring 1 or Delayed Ring 2, each
destination will start to ring when the delay time runs out. During the delay time the member PDN or
PhDN button will flash red but not ring.
Important! Delay Destinations can be PDNs of Standard telephone circuits only and Voice Mail Hunt
Group Pilot Numbers (not Multiple DN Hunt Groups).
FIELD DESCRIPTION
00 Emergency Call Group
Number
Specify the Emergency Call Group.
Possible values: 1~8 (default = no value)
01 OLG1~08 OLG8 Specify the first through eighth OLG to be chosen for an E911 call.
Possible values: 0~32 (CTX100), 0~50 (CTX670 Basic),
0~128 (CTX670 Exp.), (default = no data)
To Next Page
Loading...
