Telephone Button Programming
900 Series Programs
Strata CTX Programming - Part 3:Telephone Button Programming 04/03 13-107
Telephone Button
Programming
IP Configuration
This program enables you to set up Network Communication Protocols.
Program Number(s): 916
Prerequisite Program:
None
Reference: None
Access Sequence: Login to programming mode from your telephone button pad:
+ROG✱✱✱✱✱.
At the PASSWORD= prompt, Enter your password and press+ROG.
At the PROG= prompt enter and press +ROG.
Notes
• The LCD only displays three of the twelve IP address digits at a time. Press the 6SNU button to view
the remaining digits.
• The IP Address is the static IP address of the Strata CTX processor NIC/Ethernet connection only. The
PPP IP address for the Strata CTX processor modem is always 192.168.255.254 and cannot be
changed.
1. Press
)% to view the current TCP/IP Address 1 (press )% to view the current Subnet Mask
Address 1, or press
)% to view Default Gateway Address 1).
Press
+ROG.
2. Enter first IP Address Octet. To keep current setting go to Step 3.
3. Press
6SNU button and enter second IP Address Octet. To keep current setting go to Step 4.
4. Press
6SNU button and enter third IP Address Octet. To keep current setting go to Step 5.
5. Press
6SNU button and enter fourth IP Address Octet. To keep current setting go to Step 6.
6. Press
+ROG.
7. Press
)% to configure the remaining parameters.
8. Press
+ROG.
9. After all parameters are entered press
+ROG to submit the new settings.
10.You are automatically returned to the
PROG= prompt.
11.Enter another program number to continue programming or press
+ROG again to exit programming
mode.
FB Name FB Summary Value
IP Address
01 Enter IP Address 1.
192 = First IP Address Octet
168 = Second IP Address Octet
254 = Third IP Address Octet
253 = Fourth IP Address Octet
0~255
default =
Subnet Mask
02 Enter Subnet Mask Address 1. 0~255
default =
Default Gateway
03 Enter Default Gateway 1. 0~255
default =
To Next Page
Loading...
