Toshiba Strata CTX - DID Intercept Assignments

Trunks
318 DID Intercept Assignments
6-16 Strata CTX Programming - Part 2: CTX WinAdmin Programming 04/03
318 DID Intercept Assignments
Prerequisite Program: 304 on page 6-2
This command assigns the DID Routing table when DID numbers are undefined or not received.
1. Complete the “DID Intercept
Assignment Record Sheet” on
page D-26.
2. From the Program Menu, click
Trunk > DID Intercept.The DID
Intercept Assignments screen
displays (shown right).
3. Enter an ILG Number
...or click List to view a summary
list of programmed ILGs.
4. Enter DID Type in the 01 Type field.
5. Enter DID Intercept Assignment
data.
6. Click Submit.
FIELD DESCRIPTION
ILG Number Enter ILG number.
Possible values: 1~32 (CTX100), 1~50 (CTX670 Basic),
1~128 (CTX670 Exp), (default = no value
01 Type Select Routing Type.
Possible values: No DID (default) or Not Determined
02 MOH Source Select Music On Hold
Possible values: External 1~15 (default = External 1)
03 Group CO Destination GCO Key Group number.
Possible values: 0~32 (CTX100), 0~50 (CTX670 Basic),
0~128 (CTX670 Exp), (default = 0)
04 Pooled Line Group POOL Line Key Group Number.
Possible values: 0~32 (CTX100), 0~50 (CTX670 Basic),
0~128 (CTX670 Exp), (default = 0)