Toshiba Strata CTX - Emergency Ringdown Assignment; Group Call Pickup

Station
Assignment
5-22 Strata CTX Programming - Part 2: CTX WinAdmin Programming 04/03
210 Group Call Pickup
Prerequisite Program: 200 on page 5-1
The Call Pickup Group assignment specifies which group numbers this station will participate when either
the Group Call Pickup or the Group Directed Call Pickup features are invoked. A user may be assigned to
more than one group.
216 Emergency Ringdown Assignment
Prerequisite Program: 200 on page 5-1
Assigns Emergency Ring Down parameters to Primary DNs.
05 First Interdigit
Timer
Select the amount of time a Station has to dial after going off hook before a call is
terminated (ROT is heard).
Possible values: 1~180 (default = 15)
06 Second Interdigit
Timer
Select the amount of time the system waits between dialed digits before terminating
a call (ROT is heard).
Possible values: 1~180 (default = 5)
07 Ring Xfer No
Answer Timer
Select the Ring Transfer Idle station or Busy station (Camp-on) Recall Time (in
seconds)
Possible values: 1~600 (default = 32)
FIELD DESCRIPTION
01~32 Click in the radio button to Indicate which Call Pickup Group(s) this stations is to
participate in. A station can be assigned to more than one group.
Possible values: check = On or unchecked = Off (default)
Note 01~05 are available for CTX100, 01~10 are available for CTX670 Basic,
and 01~32 are available for CTX670 Exp.
FIELD DESCRIPTION
01 Emergency Ringdown Enable an Emergency Ringdown Number.
Possible values: Enable or Disable (default)
02 Emergency Ringdown
Timer
Enter the length of off-hook time that will cause a DN to originate an Emergency
Possible values: 0~60 (default = 0)
03 Destination Enter the destination DN for the Emergency Ringdown.
Possible values: Up to 5 digits (default = no value)
FIELD DESCRIPTION