Trunks
306 Outgoing Line Groups
Strata CTX Programming - Part 2: CTX WinAdmin Programming 04/03 6-5
Trunks
03 Private Service Type TIE Trunk Service Type.
Possible values: Standard (default) or QSIG
04 GCO Key1 Number Select the first GCO Key Group number.
Possible values: 0~32 (CTX100), 0~50 (CTX670 Basic), 0~128 (CTX670 Exp),
(default = 0)
06 Pooled Key1 Number Select first Pooled Line Key Group number.
Possible values: 0~32 (CTX100), 0~50 (CTX670 Basic), 0~128 (CTX670 Exp),
(default = 0)
07 Pooled Key2 Number Select second Pooled Line Key Group number.
Possible values: 0~32 (CTX100), 0~50 (CTX670 Basic), 0~128 (CTX670 Exp),
(default = 0)
08 COS Select Day 1, Day 2 and Night Values.
Possible values: 1~32 (default = 1)
09 FRL Select Day 1, Day 2 and Night Values.
Possible values: 1~16 (default = 1)
10 QPL Select Day 1, Day 2 and Night Values.
Possible values: 1~16 (default = 1)
11 Speech/3.1 KHz Bearer Capability 3.1 KHz Audio or Speech.
Possible values: Audio (default) or Speech
12 MOH Source Select MOH Source.
Possible values: Silence, External1~15 (default = External1)
13 Account Codes Enable Trunk forced Account Codes.
Possible values: Enable or Disable (default)
14 Destination
Restriction
Enable Destination Restriction.
Possible values: Enable or Disable (default)
15 Credit Cart Calling Enable Credit Card Calling.
Possible values: Enable or Disable (default)
16 Send CESID Enable CESID sending.
Possible values: Enable or Disable (default)
17 QSIG Sending Type Digit sending Mode for QSIG only.
Possible values: Cut Through or Senderized (default = Cut through)
18 Network COS Select Network COS number.
Possible values: 1~32 (default = 1)
FIELD DESCRIPTION
To Next Page
Loading...
