Services
540 Pilot DN Assignment
Strata CTX Programming - Part 2: CTX WinAdmin Programming 04/03 9-5
Services
FIELD DESCRIPTION
00 VM Port DN Enter the DN of an individual VM port. For direct transfer to voice mail, enter
the remote Node ID and Pilot DN.
Note Do not enter a Pilot DN. This feature is available only with CTX
Release 1.3 or higher software and with CTX WinAdmin Release 1.3
or higher software.
Possible values: Up to 5 digits (default = no value)
01 Control Method Specify In-band or SMDI integration. Select SMDI for Remote voice mail.
Possible values: Inband or SMDI (default = no value)
02 Send A/D Tone Select whether Strata CTX sends A or D tone when a station connecting to
voice mail answers or disconnects.
Possible values: Enable or Disable (default = no value)
03 Send B Tone Enable Strata CTX to send B tones in the event of a Blind Transfer Recall.
Possible values: B Tone, No Tone or B Tone and Extension Number (default =
no value)
04 End-to-end Enable Strata CTX to send DTMF tones to voice mail in response to key
presses from a digital telephone.
Possible values: Enable or Disable (default = no value)
To Next Page
Loading...
