Services
External Devices
Strata CTX Programming - Part 2: CTX WinAdmin Programming 04/03 9-49
Services
Door phone numbering for CTX670 only is as follows:
• DDCB 3 provides door phone numbers 7~9, 8 can be a door phone or door
lock.
• DDCB 4 provides door phones 10~12, 11can be a door phone or door lock.
• DDCB 5 provides door phones 13~15, 14 can be a door phone or door lock.
• DDCB 6 provides door phones 16~18, 17 can be a door phone or door lock.
• DDCB 7 provides door phones 19~21, 20 can be a door phone or door lock.
• DDCB 8 provides door phones 22~24, 23 can be a door phone or door lock.
DDCBs are numbered by the system automatically by DDCB Equipment (Shelf/
Slot/Circuit). DDCB1 is assigned to the lowest DDCB Equipment and DDCB2 to
the next lowest, etc.
If DDCB Circuit B is set to Door Lock, a Door Phone cannot be set.
01 DDCB Equipment No. Enter the DDCB equipment number to which the Door phone should be assigned.
Possible values: xx = cabinet 01 (CTX100), 01~02 (CTX670 Basic), 01~07
(CTX670 Exp.);
yy = slot 01~8 (CTX100) 01~10 (CTX670);
zz = circuit 01~16 (default = no value)
Example: If the DDCB interface should be connected to a PDKU or BDKU/BDKS
in cabinet shelf 5, slot 2, circuit 3, enter 050203.
Notes
• This is the cabinet, slot, and circuit number of the BDKU/BDKS or PDKU
interface PCB to which the DDCB is to be connected.
• If a PDN is assigned to the DDCB equipment number it must be deleted,
using Program 201, before attempting to assign the DDCB console.
Cabinet numbers:
• CTX100 – Select 01 for Base and Expansion cabinet.
• CTX670 – Select 01 for Base and 02~07 respectively for each Expansion
cabinet.
Slot numbers:
• CTX100 – Select 01~04 for Base slots and 05~08 for Expansion slots.
• CTX670 – Select 01~08 for Base slots and 01~10 for Expansion slots.
02 Tenant Number Select the Tenant Number for which the door phone should ring over external
page in the system Night mode.
Possible values: 1~2 (CTX100); 1~8 (CTX670); (default = 1)
04 Ring Duration Select the time that the door phone should ring destination devices when the door
phone button is pressed. The ring time can be 3 to 30 seconds set in 3 second
intervals - each 3 second interval provides one ring to the destination. Destination
devices include selected DNs and Page groups.
Possible values: 3~30 (default = 9)
05 LCD Name Display Enter the Door Phone name that should display on LCD telephones when the
door phone rings the telephones; or, when the telephone calls the door phone.
Possible values: Up to 16 characters (default = no value)
FIELD DESCRIPTION
To Next Page
Loading...
