Operation
908 SmartMedia
Strata CTX Programming - Part 2: CTX WinAdmin Programming 04/03 10-5
Operation
1. Install the SmartMedia Card into
the SmartMedia slot of the Strata
CTX processor.
2. From the Program Menu, click
Operation > SmartMedia.
3. Click one of the following:
• Normal Format – creates any
CTX SmartMedia folder that
does not exist already. Existing
folders are not overwritten by
this procedure.
• Forced Format – erases any
existing folders and files. All
existing data is overwritten. It
then creates the five Strata
CTX folders. See “CTX
SmartMedia Folders” on page 10-6 for more information.
• Unmount – copies the CTX event and alarm log files from the CTX processor buffers (RAM) to the
SmartMedia card and then clears the buffers. It then stops CTX from writing to the SmartMedia
Card so it can be removed without damaging it.
CAUTION! Always run unmount before removing the SmartMedia card. Failure to comply can
cause damage to the card.
• Transfer – copies the CTX event and alarm log files from the CTX processor buffers (RAM) to the
SmartMedia card and then clears the buffers.
FIELD DESCRIPTION
Operation Displays the procedure selected.
Possible values: Normal Format, Forced Format, Unmount and Transfer.
Completion Displays the progress and status of the procedure selected.
Possible values: Processing or Complete
CTX SmartMedia
Folder
Contains files in the CTX SmartMedia Folder.
Possible values: Files listed under Admlog, Errlog, Evnttrce, Progdata, and
Program folders.
Local Folder You must manually create a new folder on your PC under ctx folder > WinAdmin >
Ctmc > Ctmc_Local > SmartMedia > New Folder
The created folders will be available in the Local Folder drop-down box. You can
store CTX SmartMedia files on these folders (See details below).
To Next Page
Loading...
