Toshiba Strata CTX - Page 292

Telephone Button Programming
100 Series Programs
13-14 Strata CTX Programming - Part 3:Telephone Button Programming 04/03
Outgoing Call by Directing Individual Trunk
550 
Outgoing Call by Directing Outgoing Line Group
551 1RQH
Three Way Conferencing (Override to Tandem Connection)
560 
Enter User Programming Mode
570 
LCR -Outgoing Call
580 
Set Voice Mail Message Waiting (activate MW without ringing for VM)
591 
Release Received Message Waiting
592 
Release Sent Message Waiting (Cancel MW without ringing for VM))
593 
MW Answer access code (Retrieve Received Message Waiting)
594 
Cancel ACB
600 
Start BGM
610 
Stop BGM
611 
Start BGM for External Paging Device
612 
Stop BGM for External Paging Device
613 
Built-in modem
630 
Night Ring Answer
640 
Travelling Class Override Code Input Number
650 
Change Travelling Class Override Code
651 
Activate System Call Forward
670 
Cancel System Call Forward
671 
Call Pickup for Incoming Call -Group Pickup
680 
Call Pickup for Incoming Call -Directed Terminal
681 
Call Pickup for Incoming Call -Directed Group
682 
Call Pickup for Incoming Call -Directed DN
683 
Call Pickup for Incoming Call -Any External Call
684 
Call Pickup for On-Hold Call -Directed CO Retrieve
685 
Call Pickup for On-Hold Call -Local Retrieve
686 
Call Pickup for On-Hold Call -Remote Retrieve
687 
Call Pickup for On-Hold Call -Directed DN Retrieve
688 
Transfer to Voice Mail
690 
Repeat Last Number Dialed
700 
Volume Control for BEEP
710 
Change LCD Display Language
720 
Advisory Message - Activation
730 
Advisory Message - Cancellation
731 
Emergency Call
740 
Attendant Console Group Access Code
750 
Private Network Access Code
760 
Node ID (Coordinated Directory Number Prefix)
770 1RQH
Substitution of Dial *
780 
Substitution of Dial #
781 
Originate Call with Sub Address -Outgoing Call/Internal Call
782 
Application starting access code
800 
System Date Adjust Code (Release 1.02, MA227 or higher)
910 
System Time Adjust Code (Release 1.02, MA227 or higher)
911 
Flexible Numbering Plan Default Settings (continued)
Flexible Numbering Feature
Feature
Index
Default
Access Code
Programmed
Value