Toshiba Strata CTX - Page 308

Telephone Button Programming
200 Series Programs
13-30 Strata CTX Programming - Part 3:Telephone Button Programming 04/03
200-41 Activate Message
Waiting
)% , n, +ROG , +ROG
n = 1. Enable
2. Disable
This feature is available only with CTX Release 1.3 or higher software
and with CTX WinAdmin Release 1.3 or higher software.
Enable: This station is allowed to activate station-to-station message
waiting on other stations by dialing the other station number plus 7, 8
or 9; or, by pressing the Msg key. This feature is available with Strata
CTX R1.3 software.
Disable: This station cannot activate station-to-station message
waiting on other stations by dialing the station number plus 7, 8 or 9.
Notes
• When disabled, digital telephones are still allowed to activate
station-to-station message waiting by pressing the Msg button.
• This parameter does not apply to Voice Mail ports to use the
special Message Waiting access codes.
201
Station Delete
 , +ROG
This command deletes stations.
201-01 Primary DN
)% , n, +ROG , +ROG
PDN or PhDN to be deleted.
202
ISDN BRI Station
 , +ROG
This command assigns ISDN BRI Stations.
202-00 Primary DN
n,
+ROG .
n = Up to 5 digits ISDN BRI circuit Prime Directory Number.
202-01 Equipment
)% , xxyyzz, +ROG
xx = Cabinet 1 (CTX100),
01~02 (CTX670 Basic),
01~07 (CTX670 Exp.)
Enter the BRI equipment number assigned to this PDN. This is the
cabinet, slot, and circuit number of the RBUU/RBUS or RBSU/RBSS
interface PCB to which the the PDN is, or should be, assigned. Enter
data as xxyyzz:
Example: If the PDN should be a assigned to a BDKU in cabinet 5,
slot 2, circuit 3; enter 050203.
Cabinet numbers:
• CTX100: Select 01 for Base and Expansion cabinet.
• CTX670: Select 01 for Base and 02~07 respectively for each
Expansion cabinet.
Slot numbers:
• CTX100: Select 01~04 for Base slots and 05~08 for Expansion
slots.
• CTX670: Select 01~08 for Base slots and 01~10 for Expansion
slots.
yy = Slot 01~8 (CTX100),
01~10 (CTX670)
zz = Circuit (01~04)
202-02 ISDN Channel Group
)% , n, +ROG
n = 1~32 (CTX100)
1~48 (CTX670 Basic)
1~128 (CTX670 Exp.)
Channel Group Number.
202-03 ISDN Protocol
)% , n, +ROG
n = 1. National ISDN
2. ETSI
3. TTC
4. National ISDN - Nortel
Protocol
202-04 Type Connection
)% , n, +ROG
n = 1. Point to Point
2. Point to Multi Point
Connection format
202-05 BRI Station COS
• Day1 COS
• Day2 COS
• Night COS
)% , n, 6SNU , n,
6SNU , n, +ROG
n = 1~32 COS for Day1
COS for Day2
COS for Night
Programs 200~202 (continued)
Button Sequence Value(s) Summary