Telephone Button Programming
200 Series Programs
Strata CTX Programming - Part 3:Telephone Button Programming 04/03 13-47
Telephone Button
Programming
214
DSS Console
Assignment
,
+ROG
This assignment allows up to eight Direct Station Selection (DSS)
Consoles to be assigned to a station. The assignment is referenced to
the stations’s Primary DN.
214-00 Primary DN
n,
+ROG
n = Up to 5 digits Enter the Prime Directory Number of the station that is to be
associated with the DSS console(s).
214-
01~08
DSS 1~DSS 8
)%
~
)%
, xxyyzz,
+ROG
,
+ROG
xx =
yy =
zz =
Cabinet (01~07)
Slot (01~10)
Circuit (01~08)
Enter the DSS equipment number as xxyyzz.
• Cabinet – Select 01 for Base and Expansion cabinet (CTX100).
Select 01 for Base and 02~07 respectively for each Expansion
cabinet (CTX670).
• Slot – Select 01~04 for Base slots and 05~08 for Expansion slots
(CTX100).
Select 01~08 for Base slots and 01~10 for Expansion slots.
Example: If the DSS console should be connected to a PDKU or
BDKU/BDKS in cabinet shelf 5, slot 2, circuit 3, enter 050203.
Note If a PDN is assigned to the DSS equipment number it must
be deleted, using PRG201, before attempting to assign the
DSS console.
215
DSS Feature Keys
,
+ROG
The Feature Key assignment allows each key on the telephone to be
addressed and assigned a code representing the function to be
performed. Some feature keys require additional parameters to
completely define the key. For example, a Phantom DN needs a
directory number, ringing assignment, and the tone pitch when
ringing occurs.
215-00 PDN+DSS
yyyyyx,
+ROG
yyyyy = Primary DN (0~99999) Enter a Primary DN plus DSS Key Assignment button to program
DSS FBs.
Note FB04 Add on Modules in Program 204 must be set to One or
Two.
x = DSS (1~8)
Programs 208~218 (continued)
Button Sequence Value(s) Summary
To Next Page
Loading...
