Toshiba Strata CTX - Page 327

Telephone Button Programming
200 Series Programs
Strata CTX Programming - Part 3:Telephone Button Programming 04/03 13-49
Telephone Button
Programming
216
Emergency Ringdown
Assignment.
 , +ROG
Assigns Emergency Ring Down parameters to Primary DNs.
216-00 Primary DN
n,
+ROG
n = Up to 5 digits Enter the Primary DN.
216-01 Emergency Ringdown
)% , n, +ROG
n = 1. Enable
2. Disable (default)
Enable an Emergency Ringdown Number.
216-02 Emergency Ringdown
Timer
)% , n, +ROG
n = 5~60
(default = 0)
Enter the length of off-hook time that will cause a DN to originate an
Emergency
216-03 Destination
)% , n, +ROG , +ROG
n = Up to 5 digits Enter the destination DN for the Emergency Ringdown.
217
ISDN Station Data
 , +ROG
ISDN stations need a set of parameters to be set to define its
capabilities. These include a Name when calling display phones, Call
of Service settings, etc.
217-00 Primary DN
n,
+ROG
n = Up to 5 digits Enter Primary DN.
217-01 Station Name
)% , n, +ROG ,
n = Up to 9 digits Enter a name for this station.
217-02 Dial Method
)% , n, +ROG ,
n = 1. Dial Tone (default)
2. Entry Tone
3. No Tone
Select the audible tone when dialing.
217-03 System Call Forward
)% , n, +ROG ,
n = 0~32
(default = 0)
Select the System Call Forward assignment for this station.
217-04 CF Password
)% , n, +ROG ,
n = Up to 4 digits Protect the System Call Forward settings by creating a password.
217-05 Door Phone Override
DND
)% , n, +ROG ,
n = 1. Enable
2. Disable (default)
Enable the Door Phone ringing indicator to override Do Not Disturb.
217-06 Emergency Call
Group
)% , n, +ROG ,
n = 1~8
(default = 1)
Select this station’s emergency call group.
217-07 COS Override Code
)% , n, +ROG ,
n = 1. Enable
2. Disable (default)
Enable Class of Service override.
217-08 Display DN
)% , n, +ROG ,
n = Up to 5 digits Enter the DN to be displayed on the LCD.
217-09 VMID Code SMDI
)% , n, +ROG ,
n = Up to 10 digits
Digits 0~9, * and #
Enter the voice mail box number that should answer calls when this
PDN calls voice mail; or, when this PDN is called and then forwards to
voice mail (this number is prefixed by codes in Program 579, 11~16).
Note This VMID code is sent to the voice mail device in SMDI
packets or DTMF tones on direct and forwarded calls to the
PDN. See Program 580 for SMDI or DTMF choice.
217-12 Name Display
)% , n, +ROG , +ROG
n = 1. Enable
2. Disable
Whether to put the user name in the list display.
218
Station Hunt Group
Assignment
 , +ROG
This assignment configures station DNs to hunt groups and assigns
the order of rotation in which the DNs are hunted.
218-00 Hunt Group Number
n,
+ROG
n = 1~640 Enter an existing Hunt Group number or use the List, Add, Append,
Modify, or Delete buttons as described above.
Programs 208~218 (continued)
Button Sequence Value(s) Summary