Toshiba Strata CTX - Page 333

Telephone Button Programming
300 Series Programs
Strata CTX Programming - Part 3:Telephone Button Programming 04/03 13-55
Telephone Button
Programming
304-06 Pooled Key Number
)% , n, +ROG
n = 0~32 (CTX100)
0~50 (CTX670 Basic)
0~128 (CTX670 Exp.)
(default = 0)
Select ILG Pooled Line Key Group for DIT mode. The same Pooled
Line Group cannot belong to different ILGs.
0~128 (CTX670), 0~32 (CTX100) (default = 0)
304-07 COS
)% , n, 6SNU , n, 
6SNU
, n, +ROG
n = 1~32
(default = 1)
Select Day 1, Day 2 and Night Values.
304-08 DRL
)% , n, 6SNU , n, 
6SNU
, n, +ROG
n = 1~16
(default = 1)
Select Day 1, Day 2 and Night Values.
304-09 FRL
)% , n, 6SNU , n, 
6SNU
, n, +ROG
n = 1~16
(default = 1)
Select Day 1, Day 2 and Night Values.
304-10 QPL
)% Q 6SNU Q 
6SNU Q +ROG
n = 1~16
(default = 1)
Select Day 1, Day 2 and Night Values.
304-11 DID Digits
)% , n, +ROG
n = 0~7
(default = 0)
Select number of DID digits received from CO.
304-12 Speech/3.1 KHz
)% , n, +ROG
n = 1. Audio (default)
2. Speech
Select Bearer Capability 3.1 KHz Audio or Speech.
304-13 Ringing Timer Delay 1
)% , n, +ROG
n = 0~60 sec.
(default = 12)
Select time to ring the Delay 1 destination.
304-14 Ringing Timer Delay 2
)% , n, +ROG
n = 0~60 sec.
(default = 24)
Select time to ring the Delay 2 destination.
304-15 Interdigit 1 Timer
)% , n, +ROG
n = 1~180 sec.
(default = 15)
Select Interdigit 1 timer value.
304-16 Interdigit 2 Timer
)% , n, +ROG
n = 1~180 sec.
(default = 5)
Select Interdigit 2 timer value.
304-17 Auto Camp-on
)% , n, +ROG
n = 1. Enable (default)
2. Disable
Select in box to toggle Automatic Camp-on.
304-18 Calling Number ID
)% , n, +ROG
n = 1. User Provided
(default)
2. Network Provided
Select Calling Number Identification source.
304-19 Intercept
)% , n, +ROG
n = 1. Enable
2. Disable (default)
Enable Intercept. A call is transferred to a special destination called
intercept position when the destination of a trunk line call is not
determined with DID, DIT or DISA. Intercept is also activated when
the destination is determined, but the call cannot be terminated due to
a defect or an incorrect number. If the system has a simplified
attendant console, the attendant console is usually specified to
terminate the call. This function ensures termination of a trunk line
call.
304-20 Send Dial Tone
)% , n, +ROG
n = 1. Enable
2. Disable (default)
Enable Send Dial Tone.
304-21 TGAC Override
)% , n, +ROG
n = 1. Enable
2. Disable (default)
Enable Trunk Group Access Code (TGAC) override.
304-22 Network COS
)% , n, +ROG
n = 1~32
(default = 1)
Enter the Network COS number.
304-23 LCR Group
)% , n, +ROG
n = 1~16
(default = 1)
Enter the LCR Group number. Calls from this ILG cannot tandem if
this field is not entered.
Programs 303~315 (continued)
Button Sequence Value(s) Summary